Furniture repair advice

Repair
Your furniture

Repair
your furniture

All our products are delivered with pads that protect the furniture feet as well as floor surfaces.

Need to replace your pads? Find all our spare parts in our product catalogue.

Any scratches should be quickly treated using the available Fermob after-sales tools (such as touch-up pens and sprays in the color of your furniture).

The sooner these interventions are carried out, the less the rust will spread. We recommend this type of touch-up for the parts of your furniture that cannot be seen. You do not need to use a rust remover on aluminum furniture. Simply sand and repaint.

Using Anti-Rust Spray

If you observe minor corrosion on your steel furniture (most often located at the welds, rivets, joints, under the tops or under the seats) the Fermob anti-rust spray will allow you to stop the spread of rust:

1. Sand the rusted area with sandpaper (240 or 120), and then wipe the sanded area with a clean cloth to remove impurities.

2. Before using the rust-proofing product, shake the spray can well. Do a test spray onto a piece of cardboard

3. Apply the rust-proofing product in a sweeping action.

4. Allow to dry for 5 to 10 minutes.

5. Move to the painting stage, where you will be using the touch-up pen or the paint spray. Apply two coast of paint in areas where anti-rust spray has been used.

Using Anti-Rust Spray

If you observe minor corrosion on your steel furniture (most often located at the welds, rivets, joints, under the tops or under the seats) the Fermob anti-rust spray will allow you to stop the spread of rust:

	1. Sand the rusted area with sandpaper (240 or 120), and then wipe the sanded area with a clean cloth to remove impurities.
	2. Before using the rust-proofing product, shake the spray can well. Do a test spray onto a piece of cardboard
	3. Apply the rust-proofing product in a sweeping action.
	4. Allow to dry for 5 to 10 minutes.
	5. Move to the painting stage, where you will be using the touch-up pen or the paint spray. Apply two coast of paint in areas where anti-rust spray has been used.

Using aerosol Paint

Wear and tear of painted items (scratches, stains, etc.), whether natural or through failure to follow our precautions for use, can be alleviated on Textured shades (but not on Smooth shades) by applying paint spray:

1. Follow the cleaning instructions to clean the surface to be painted.

2. Before using the paint spray, shake the spray can well. Do a test spray onto a piece of cardboard.

3. Apply the paint in a sweeping action, starting the application on the outside of the product to avoid any risk of projection..

4. Allow to dry for 5 to 10 minutes.

5. A second coat of paint can be applied.

Using Aerosol Paint

	1. Follow the cleaning instructions to clean the surface to be painted.
	2. Before using the paint spray, shake the spray can well. Do a test spray onto a piece of cardboard.
	3. Apply the paint in a sweeping action, starting the application on the outside of the product to avoid any risk of projection.
	4. Allow to dry for 5 to 10 minutes.
	5. A second coat of paint can be applied.

Products

Categories

info

legal notices